c&p. Is it true?

Now this was not about who has the best spread to your digital TV bread, it’s about Bamba TV channel offering.

"The company lays claim to the fact that they have over 50 channels on offer. Well! I will have you know that as much as they do have one of the best offers for FTAs, this is skewed. The box receives Bamba TV channels, Signet channels and Pang tv channels. And right there is where the devil is in the details. Bamba, Signet and Pang have a duplication of sorts, so you will find some channels repeated on the three of them, but Bamba Tv will count these as, you know, more channels.

I have the set-up at my place and counted as many as 70 active channels. In there, I saw KBC over three times, Kiss TV the same and on and on. There are channels following each other in channel numbers that are the same channel, several of them. So If I were to remove duplication, I could say around 20 channels are repeated, sometimes thrice. That leaves, say 30 different channels."

There's 8 West A and 8 West C. Which one?

@gordon... that's why we HV opted for the bidii yako FTA.

Aha. In that case, I'd rather go with Eutelsat's own maps:

http://www.eutelsat.com/...-downlink-coverage.html[/quote]

killing my hopes.
any other tp on nilesat which is easier to nab apart from 11296.

by they way could there b a sat that's out of range but easier to nab? I feel nilesat needs to be way above my house as even if I get it, it will b unstable as I HV done all possibilities.

noticed something, on aizen of dish there is that ka plate at the centre. I HV it but did not fix it as I felt it was big then the centre.

You can use satstar to check out the beams receivable in your location (set your location first). Perhaps you could make an attempt at Yahsat 1A East beam.

Talk to this guy, Aizen, who's getting Nilesat on a 180cm pf:

http://www.jamiiforums.c...d-and-sat-gear-653.html

[/quote]

noticed something, on aizen of dish there is that ka plate at the centre. I HV it but did not fix it as I felt it was big then the centre.
[/quote]

You should assemble and attach all parts of the prime focus dish before use. Remember the parabola is the reflective surface that gathers the waves.

You should assemble and attach all parts of the prime focus dish before use. Remember the parabola is the reflective surface that gathers the waves.
[/quote]

thanks.
just saw on the manual that to b used if necessary n d one at d office didn't HV, saw I didn't think it was necesry .

I just envy d guy with a motorised dish with 12 SATs.
[/quote]

anyone who knows if its possible to weka biss keys to the azam decoder

sawa sawa ahsante, guess I will have to stick to my 4922, though it has some missing keys on the remote.