wazua Thu, Nov 28, 2024
Welcome Guest Search | Active Topics | Log In | Register

2 Pages12>
Concrete mix
kamundu
#1 Posted : Tuesday, January 29, 2013 7:14:04 PM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
Kwa watu waliojenga
Which is recommended. Concrete mix for upper floor (slab) of a residential house? Im getting all sorts of ratios. Want to be armed with knowledge for my koroga kesho
Peace in our Homeland.
holycow
#2 Posted : Tuesday, January 29, 2013 7:57:00 PM
Rank: Veteran


Joined: 11/11/2006
Posts: 971
Location: Home
kamundu wrote:
Kwa watu waliojenga
Which is recommended. Concrete mix for upper floor (slab) of a residential house? Im getting all sorts of ratios. Want to be armed with knowledge for my koroga kesho


This is not under stocks

Concrete class 20, recommended for most light structural works. 1:2:4 class.

1:cement
2:Sand/Fine aggregate
4:Coarse aggregate/ballast(aggregate should not exceed 20mm)

Water cement ratio is 0.5.
The fundis can sometimes skip a component in the batch. Hope you had someone check your reinforcement if they were properly placed.

Good luck.
kamundu
#3 Posted : Tuesday, January 29, 2013 8:06:42 PM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
holycow wrote:
kamundu wrote:
Kwa watu waliojenga
Which is recommended. Concrete mix for upper floor (slab) of a residential house? Im getting all sorts of ratios. Want to be armed with knowledge for my koroga kesho


This is not under stocks

Concrete class 20, recommended for most light structural works. 1:2:4 class.

1:cement
2:Sand/Fine aggregate
4:Coarse aggregate/ballast(aggregate should not exceed 20mm)

Water cement ratio is 0.5.
The fundis can sometimes skip a component in the batch. Hope you had someone check your reinforcement if they were properly placed.

Good luck.


Thanks! Yes someone checked my reinforcement today.
How do you physically apportion water to cement using that ratio?
Peace in our Homeland.
holycow
#4 Posted : Tuesday, January 29, 2013 8:44:43 PM
Rank: Veteran


Joined: 11/11/2006
Posts: 971
Location: Home
The water cement ratio is a guide, depending on the casting conditions. Google hydration of cement. Its not strictly 0.5, the method of batching might necessitate more water than that. Its more of a text book thing/ideal condition. Make sure the water is not too much but enough to let the concrete be moved(workability)
kamundu
#5 Posted : Tuesday, January 29, 2013 9:09:48 PM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
Thanks. What about a 1:3:4 ratio which is commonly used?
Peace in our Homeland.
Ngong
#6 Posted : Tuesday, January 29, 2013 9:34:52 PM
Rank: Veteran


Joined: 11/17/2012
Posts: 1,461
Location: Ngong Forest
You mean u are doing it yourself? No senior fundi, approved arch & structural maps?
Since they contain all this info.
kamundu
#7 Posted : Tuesday, January 29, 2013 9:44:11 PM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
Ngong wrote:
You mean u are doing it yourself? No senior fundi, approved arch & structural maps?
Since they contain all this info.


Actually, i have all those, infact my engineer was on site today. I am just getting confused na hizo ratios, fundi anasema tufanye 1:3:4, engineer anasema 1:1.5:3
Peace in our Homeland.
holycow
#8 Posted : Tuesday, January 29, 2013 10:13:13 PM
Rank: Veteran


Joined: 11/11/2006
Posts: 971
Location: Home
kamundu wrote:
Ngong wrote:
You mean u are doing it yourself? No senior fundi, approved arch & structural maps?
Since they contain all this info.


Actually, i have all those, infact my engineer was on site today. I am just getting confused na hizo ratios, fundi anasema tufanye 1:3:4, engineer anasema 1:1.5:3


Class 15 the 1:3:6 is for blinding, the concrete that is first laid on the ground/soil. Acts like a protection.
1:1.5:3 is for class 25. Ask him what class he used in his design, if he used class 25 then kindly follow his instructions. I find class 25 to be on the high side for a residential building unless you plan on doing some light industrial work on the suspended floor.
kamundu
#9 Posted : Tuesday, January 29, 2013 10:23:39 PM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
holycow wrote:
kamundu wrote:
Ngong wrote:
You mean u are doing it yourself? No senior fundi, approved arch & structural maps?
Since they contain all this info.


Actually, i have all those, infact my engineer was on site today. I am just getting confused na hizo ratios, fundi anasema tufanye 1:3:4, engineer anasema 1:1.5:3


Class 15 the 1:3:6 is for blinding, the concrete that is first laid on the ground/soil. Acts like a protection.
1:1.5:3 is for class 25. Ask him what class he used in his design, if he used class 25 then kindly follow his instructions. I find class 25 to be on the high side for a residential building unless you plan on doing some light industrial work on the suspended floor.


1:3:4 nayo? Some site says its just like 1:2:4
Peace in our Homeland.
dunkang
#10 Posted : Tuesday, January 29, 2013 10:24:21 PM
Rank: Elder


Joined: 6/2/2011
Posts: 4,818
Location: -1.2107, 36.8831
kamundu wrote:
Ngong wrote:
You mean u are doing it yourself? No senior fundi, approved arch & structural maps?
Since they contain all this info.


Actually, i have all those, infact my engineer was on site today. I am just getting confused na hizo ratios, fundi anasema tufanye 1:3:4, engineer anasema 1:1.5:3

Just do what the engineer is telling you, especially if he is the one who did the the structural design.
The one he is Class 25 (i.e 1:1.5:3).
NOTE: These ratio are in terms of weight and not volume, so, the one of fundi sounds 'funny' to me, but i assumed his is volume based.
If nothing was specified in the approved design/construction drawings or the BoQ specific item, then call the design engineer and confirm.
Receive with simplicity everything that happens to you.” ― Rashi

kamundu
#11 Posted : Tuesday, January 29, 2013 10:28:41 PM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
dunkang wrote:
kamundu wrote:
Ngong wrote:
You mean u are doing it yourself? No senior fundi, approved arch & structural maps?
Since they contain all this info.


Actually, i have all those, infact my engineer was on site today. I am just getting confused na hizo ratios, fundi anasema tufanye 1:3:4, engineer anasema 1:1.5:3

Just do what the engineer is telling you, especially if he is the one who did the the structural design.
The one he is Class 25 (i.e 1:1.5:3).
NOTE: These ratio are in terms of weight and not volume, so, the one of fundi sounds 'funny' to me, but i assumed his is volume based.
If nothing was specified in the approved design/construction drawings or the BoQ specific item, then call the design engineer and confirm.


The fundis do 1:3:4 by volume not weight
Peace in our Homeland.
kamundu
#12 Posted : Wednesday, January 30, 2013 10:17:36 AM
Rank: Member


Joined: 5/9/2011
Posts: 786
Location: Mashinani
@holycow ahsante. We decided tufanye 1:2:3 after consultations na engineer
Peace in our Homeland.
wangu.n
#13 Posted : Wednesday, January 30, 2013 8:33:37 PM
Rank: Member


Joined: 8/4/2009
Posts: 136
Ratios are always by volume not weight.

class 20 1.2.4 is most suitable for residential structures where the loading is minimal.

wats the rationale given by your engineer on settling for a mix of 1.2.3?
wangu.n
#14 Posted : Wednesday, January 30, 2013 8:36:57 PM
Rank: Member


Joined: 8/4/2009
Posts: 136
Next time consider using waffles for your slab and slash costs..

It's too late for tomorrow's concreting but next slab holla and we compare solid slab vs waffle slab.

There are precast staircases in the market now as well.
Ngong
#15 Posted : Wednesday, January 30, 2013 9:14:15 PM
Rank: Veteran


Joined: 11/17/2012
Posts: 1,461
Location: Ngong Forest
wangu.n wrote:
Next time consider using waffles for your slab and slash costs..

It's too late for tomorrow's concreting but next slab holla and we compare solid slab vs waffle slab.

There are precast staircases in the market now as well.


Any photos sir?
wangu.n
#16 Posted : Thursday, January 31, 2013 8:26:16 AM
Rank: Member


Joined: 8/4/2009
Posts: 136
I will post here pics in the course of the day.
livie
#17 Posted : Thursday, March 21, 2013 3:27:59 PM
Rank: Veteran


Joined: 11/1/2008
Posts: 834
If you are going to be thinking only one thing, you might as well be thinking big. -Donald J . Trump
livie
#18 Posted : Thursday, March 21, 2013 4:28:49 PM
Rank: Veteran


Joined: 11/1/2008
Posts: 834
If you are going to be thinking only one thing, you might as well be thinking big. -Donald J . Trump
Ngong
#19 Posted : Thursday, March 21, 2013 5:32:48 PM
Rank: Veteran


Joined: 11/17/2012
Posts: 1,461
Location: Ngong Forest
Hi @livie, is this the waffle slab someone has mentioned above?
vky
#20 Posted : Saturday, March 23, 2013 9:57:29 PM
Rank: Member


Joined: 6/17/2010
Posts: 572
Ngong wrote:
Hi @livie, is this the waffle slab someone has mentioned above?

you can check out the kcb hq under construction in upperhill before they do the cladding, think they used waffle slabbing to put up the structure
'One headache for famous medieval holy people was that someone might murder you to acquire your body parts for the relics trade'
Users browsing this topic
Guest (3)
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Copyright © 2024 Wazua.co.ke. All Rights Reserved.