wazua Fri, Nov 15, 2024
Welcome Guest Search | Active Topics | Log In | Register

DSTV Signal
bwenyenye
#1 Posted : Wednesday, November 02, 2011 11:44:05 AM
Rank: Elder


Joined: 5/24/2007
Posts: 1,805
I am experiencing very interesting phenomena with these guys. Most of my channels play like a scratched CD. Only one, 108 is very clear and consistent. It began with SonyMax, NatGeo, DiscW, sasa it has spread to all the rest hata citizen. Anyone else experiencing this?
I Think Therefore I Am
samdoe
#2 Posted : Wednesday, November 02, 2011 11:53:44 AM
Rank: Member


Joined: 8/4/2009
Posts: 48
Check dis repointing, maybe it has tilted, though this happens alot on rainy days and then gets back to normal
bwenyenye
#3 Posted : Wednesday, November 02, 2011 12:04:17 PM
Rank: Elder


Joined: 5/24/2007
Posts: 1,805
@Samdoe...Thanks but could you say that in public school English please. I need to get those installers again ama?
I Think Therefore I Am
klan
#4 Posted : Wednesday, November 02, 2011 1:31:21 PM
Rank: Member


Joined: 3/3/2011
Posts: 119
had the same problem last week. scratches but good sound. I switched off the run the channel set up and was good to go.
holycow
#5 Posted : Wednesday, November 02, 2011 1:45:35 PM
Rank: Veteran


Joined: 11/11/2006
Posts: 971
Location: Home
Blame it on the rains, if you got a 90cm dish, then you are on Ku band which gets affected by rain(rain fade). Also, DSTV signals are beamed from W7 satellite but different transponders so that could be related to specific transponders being down.
If the problem persists, try re-aligning the dish if no much change, guess your LNB has partially failed hence cant receive certain frequencies.

Disclaimer:
I dont work for DSTV but Dr. Google is a good friend.
bwenyenye
#6 Posted : Wednesday, November 02, 2011 1:47:50 PM
Rank: Elder


Joined: 5/24/2007
Posts: 1,805
klan wrote:
had the same problem last week. scratches but good sound. I switched off the run the channel set up and was good to go.


You mean doing the channel rescan after you switch the decoder off then on? Did yours give the message 'signal lost... do not switch off decoder while it attempts to blablabla..' after holding up the scratched picture for a while?
I Think Therefore I Am
klan
#7 Posted : Wednesday, November 02, 2011 3:22:52 PM
Rank: Member


Joined: 3/3/2011
Posts: 119
bwenyenye wrote:
klan wrote:
had the same problem last week. scratches but good sound. I switched off the run the channel set up and was good to go.


You mean doing the channel rescan after you switch the decoder off then on? Did yours give the message 'signal lost... do not switch off decoder while it attempts to blablabla..' after holding up the scratched picture for a while?


yap.The problem hasn't recurred again.
Gordon Gekko
#8 Posted : Wednesday, November 02, 2011 5:01:08 PM
Rank: Elder


Joined: 5/27/2008
Posts: 3,760
Had the same problem when I had DSTV (cant afford it anymore) and the solution by an unregistered estate electrician was to replace the cable from the dish to the decoder. It became as clear as HD. Apparently the cable was over 6 years old.
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Copyright © 2024 Wazua.co.ke. All Rights Reserved.