Very interesting conversation here,lots of facts,myths and lies (or ignorance). We all agree that fuel efficiency relies on several factors key of them being driver behaviour. However,maintenance,traffic pattern,quality of fuel,fuel octane rating,vehicle load,tyre pressure,road surface,tyre rating etc all affects fuel efficiency. Driving a 3 litre engine does not necessarily mean you spend more fuel than your buddy who is drives 2 litre. All the mentioned factors plays a role.
With regard to Manual or Auto,offcourse Auto offers more comfort than Manual but has obvious implications. Most people will complain of wear on the part of the automatic gearbox,which is off course expensive to repair and or replace. Wear of the gearbox points at the driving behaviour/style. The gearbox is meant to last the lifetime of the vehicle,the mistake we make is while driving in traffic,we still retain the vehicle in 'D',thats forward drive. The gearbox is made of many rotating parts,which get damaged because they clash with each other. Offcourse this is gradual process but it does take place and 2 to 3 years down the line,the transmission will not be as good. There is a big difference with the manual gearbox,because with manual gearbox,while in traffic,you only have three choices as follows:
a) Gear is still engaged,therefore the clutch is pressed in,so no clashing of parts i.e the engine is running but its not transmiting anything. Engine power is only transmitted when you start to release the clutch,releasing the clutch transmits power from the engine to the gearbox top shaft which passes this to the wheels to power the vehicle forward or backward.
b) Gear in Neutral,so no clashing of parts
c) You will try to balance the clutch and brake. When you do this,it does not take long before you visit your local mechanic with a clutch problem. If AT,this clutch balancing feature is missing,so lots of things will be going on in the transmission,causing wear. Improved models now have a transmission control module which liaises with engine control module for better cordination but still it cannot eliminate this wear.
If you want to enjoy longer service from the AT,simply observe this ' do not let the vehicle remain in D for long when its not in motion'.
Vehicle technology is very dynamic and now with Tiptronic and or CVT,you can get what you want. My car 'C class',has this feature with 5 speed automatic and 4 speed manual. I chose how to drive it depending on what I want at that time. One can shift from the top speed in D to manual speed,gear 4,3 or 2 depending on driving requirements.
Another important feature is use of 1,2 used with AT. Most users do not know how to use 1 &2. For example,if you are stuck in mud and requires maximum torque,simply shift to 1,you can also move from 1 to 2 just like in manual gearox.
For those driving in very hilly areas and one is descending - going down the hill,its very important not to rely on brakes so much because brakes get heated up and are likely to fade. To ensure you get support of engine brakes,shift transmission to 2 or 3 if fitted
Automatic transmission is the way to go,we have to learn how to use it properly
"You've never lived until you've almost died; for those who have fought for it, life has a flavour the protected will never know."